TURNING POINT MASTERGUARD PROPELLER HUB FOR 90-300HP OUTBOARD MOTORS WITH A 4.75″ GEARCASE (707 KIT)
700 Series Installation Kits. The Turning Point Masterguard Propeller Hub System enables the end-user to economically carry a spare or different diameter/pitch propeller to suit the days skiing, fishing or cruising activities.
The MasterGuard Hub design utilises shock and vibration absorbing polymers for unmatched dependability.
- Lifetime warranty for engines under 200hp.
- Premium corrosion-resistant brass splines.
- Eliminate hub system vibration & chatter.
- Reduce gear shock & engine/drive damage.
- Reduce prop replacement cost by up to 50%
NOTE: Not applicable with Turning Point’s 10, 20 and 200 Hub Kit series.
NOTE: **Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty.
Choosing your Turning Point propeller is a two-step process:
- Select the Installation Kit to suit the drive shaft on your outboard. Check the table below for your engine model. If not listed, then see other Turning Point hub kits.
- Choose the:
- Turning Point Aluminium 3 Blade Hustler propeller LE Model or,
- Turning Point Aluminium 4 Blade Hustler propeller LE Model or,
- Turning Point Mach3 Express 3 Blade Stainless Steel propeller EX Model or,
- Turning Point Mach4 Express 4 Blade Stainless Steel propeller EX Model
- Turning Point Mach3 OS Express 3 Blade Stainless Steel propeller to these hub kits (all sold separately)
| Manufacturer | Splines | Suits Model | Notes |
|---|---|---|---|
| Honda | 15 | BF115D, BF135, BF150, BF200 (’02-’12), BF225 (’02-’12) | Use 707 Super Duty Kit for 200+hp Engines |
| Johnson | 15 | 4 stroke: 200hp, 225hp | Use Express Mach3 OS series props only |
| Suzuki | 15 | DT 2 stroke: 150hp to 225hp. DF 4 stroke: 150 to 300hp | Use 707 Super Duty Kit for 200+hp Engines. |
![Whitecap Door Hinge – 316 Stainless Steel – 1-1/2″ x 3″ [6028]](https://www.sailorgearcorner.com/wp-content/uploads/2026/10/whitecap-door-hinge-316-stainless-steel-1-1-2-x-3-6028.webp)